Nortel DMS-100 Series Maintenance Manual page 290

6-102 RLCM-EDC card replacement procedures
NT6X53 card NT6X53 card
in LCM in LCM
(continued) (end)
11
12
13
14
15
16
297-8381-550 Standard 02.02 April 1999
To load the LCM unit, type
>LOADPM UNIT unit_no CC
and press the Enter key.
where
unit_no is the LCM unit (0 or 1) you must load
If load
passes
fails
To return the LCM unit to service and switch load to the standby bank, type
>RTS UNIT lcm_unit SWLD
and press the Enter key.
where
lcm_unit is the LCM (0 or 1) busied in step 4
If RTS
passes
fails
Send defective cards for repair according to local procedure.
Record the items that follow in office records:
date that card replacement occurred
serial number of the card
indications that prompt replacement of the card
Proceed to step 16.
For additional help, contact the next level of maintenance.
The procedure is complete.
Do
step 12
step 15
Do
step 13
step 15