RLCM-EDC hardware
This chapter describes the Remote Line Concentrating Module with
Extended Distance Capability (RLCM-EDC) hardware components. The
RLCM–EDC hardware components give subscribers the full resources of the
digital switching system. The following sections describe hardware
components and additional components of the RLCM-EDC.
RLCM-EDC hardware components
The RLCM-EDC is in a Digital Multiplex System (DMS) remote line
controller cabinet (RLCC). The cabinet contains four shelves with the
following components:
Hardware configuration
The following figure, RLCC cabinet, shelf, and panel arrangement, shows
the layout of the RLCM-EDC equipment. The equipment is in a single
DMS-100 cabinet equipment bay. The approximate external dimensions of
the bay are 2208 mm by 685 mm by 457 mm. These dimensions equal 87
in. by 27 in. by 18 in.
line concentrating module (LCM)
host interface equipment (HIE)
frame supervisory panel (FSP)
remote maintenance module (RMM)
DMS-100 Family Maintenance Manual ABSK007
3-1