Nortel DMS-100 Series Maintenance Manual page 197

Replacing an NT0X91 in FSP
At your current location
1 Obtain a replacement card. Ensure that the replacement card has the same
product engineering code (PEC), including suffix, as the card being removed.
2 Use the following table to identify the slot containing the alarm and control card
to be replaced.
Alarm and control cards
NT6X36AA
NT0X91AE
NT0X91AA
NT6X36AC
Note: Refer to the following figure for FSP card slot locations.
FSP Alarm and control cards
NT6X36AC
card in slot
CD 4
NT0X91AA
card in slot
CD 3
NT0X91AE
card in slot
CD 2
RLCM-EDC card replacement procedures 6-9
NT6X36AA
card in slot
CD 1
DMS-100 Family Maintenance Manual ABSK007
in FSP
(continued)
slot
slot CD1
slot CD2
slot CD3
slot CD4
NT0X91
FSP
cover