Nortel DMS-100 Series Maintenance Manual page 235

Example of a MAP response:
Test Passed
or
Test Failed
If TST
passes
fails
12
To return the RMM to service, type
>RTS
and press the Enter key.
If RTS
passes
fails
13 To send defective cards for repair, follow the local procedures.
14 Record information for office records, as follows:
date of the card replacement
serial number of the card
details or reasons for replacement of the card
15 Go to step 18.
Return to the Clearing an alarm procedure that directs you to this card
16
replacement procedure. If necessary, go to the point where the system
produces the defective card list. Identify the next defective card on the list. In
this manual, go to the appropriate replacement procedure for the card.
17 For additional help, contact the next level of maintenance.
18 The procedure is complete. Return to the maintenance procedure that directs
you to this card replacement procedure. Continue as directed.
RLCM-EDC card replacement procedures 6-47
Do
step 12
step 17
Do
step 13
step 17
DMS-100 Family Maintenance Manual ABSK007
NT2X59 NT2X59
in RMM in RMM
(continued) (end)