Summary of replacing NT6X53 card in LCM
At PM level of MAP
display, post the
LCM
Busy the unit with
the defective card
Power down the unit
Replace card with a
card that has an
identical PEC
Power up the unit
Query the OOS
LCM unit for valid
loadfiles
RLCM-EDC card replacement procedures 6-97
This flowchart summarizes
the procedure.
Use the instructions in the
procedure that follows this
flowchart to perform the
procedure.
DMS-100 Family Maintenance Manual ABSK007
NT6X53 card
in LCM
(continued)
1