Nortel DMS-100 Series Maintenance Manual page 38

1-26 Maintenance overview
QUERYPM command Output for the QUERYPM command is different
for a RLCM-EDC as compared to an existing SMEM LCM. The command
functionality remains unchanged for existing smaller memory (64K and
256K) LCMs, as seen in the example below.
>QUERYPM
Example of MAP response
4M LCM
PM Type: LCM
LCM REM1 02 0
ESA equipped: No, Intraswitching is Off
Loadname: LCMINV – REDC07AA
Unit0 Loads: Act– REDC07AB Stby– REDC07AA
Unit1 Loads: Act– REDC07AB Stby– REDC07AA
REX is ON; INCOMPLETE on SAT. 1995/10/28 at 01:35:19
Node Status: {OK, FALSE}
Unit 0 Status: {OK, FALSE}
Unit 1 Status: {OK, FALSE}
Site Flr RPos
REM1
Services : NEUTRAL
SMEM LCM
PM Type: LCM
Memory Size – Unit 0: 256K , Unit 1: 256K
ESA equipped: NO, Intraswitching is OFF
Loadnames: LCMINV – LCM01D
LCM HOST 00 0 is included in the list of LCM types
REX on LCM HOST 00 0 has not been performed.
Node Status: {OK, FALSE}
Unit 0 Status: {OK, FALSE}
Unit 1 Status: {OK, FALSE}
Ring Generator Status:
Site Flr RPos
NCSU
Services : NEUTRAL
297-8381-550 Standard 02.02 April 1999
Int. No.: 9
Memory Size – Unit 0: 4M , Unit 1: 4M
Bay_id
01 K03 RLCM 02
Int. No.: 7
scheduled for a REX test.
RG 0 Status: {OK}
RG 1 Status: {OK}
RG in Overload : NO
Bay_id
01 B01 RLCM 00
Status index: 7
Shf Description
04 LCM 02 0
or
Status index: 4
, Unit0: LCM01D
/RG: 1
/RG: 1
Standby
Preferred
Shf Description
04 LCM 00 0
Node_No: 40
Slot EqPEC
6X04AA
Node_No: 104
, Unit1: LCM01D
Slot EqPEC
6X04AA