Nortel DMS-100 Series Maintenance Manual page 260

6-72 RLCM-EDC card replacement procedures
NT6X21 NT6X21
in LCM in LCM
(continued) (end)
At the MAP terminal
6
7
8
9
10
11
297-8381-550 Standard 02.02 April 1999
To test the removed line card, type
>DIAG
and press the Enter key.
If the DIAG
passes
fails
To return the line card to service, type
>RTS
and press the Enter key.
If RTS
passes
fails
To send defective cards for repair, follow the local procedures.
Record information for office records, as follows:
date of card replacement
serial number of the card
details and reason for replacement of the card
Go to step 11.
For additional help, contact the next level of maintenance.
The procedure is complete.
Do
step 7
step 10
Do
step 8
step 10