Nortel DMS-100 Series Maintenance Manual page 28

1-16 Maintenance overview
Loading continues while the prompt is returned to operating company
personnel when the NOWAIT option is used, such as in the following
example.
>LOADPM UNIT 1 CC NOWAIT
Example of MAP response
LCM REM1 0 0 Unit 1 Request Submitted.
LOADPM command error messages The following responses are
observed when an attempt is made to load an RLCM-EDC LCM or unit and
fails.
The following response is observed for the LOADPM command when
performed on a unit that has a mate unit OOS. Operating company
personnel must RTS the OOS unit and retry the LOADPM command with
the MATE option. When the specific bank to load from is not included in
the command, the system defaults to the STBY bank of the mate unit.
>LOADPM UNIT 1 MATE ACT
>LOADPM UNIT 1 MATE STBY
>LOADPM UNIT 1 MATE
Example of MAP response
LCM REM1 0 0 Unit 1
The following response is observed for the LOADPM command when the
mate unit is OOS and the ACT option is used. When this response is
observed, operating company personnel must RTS the OOS unit then
execute the LOADPM command with ACT option.
>LOADPM UNIT 1 ACT
Example of MAP response
LCM REM1 0 0 Unit 1
297-8381-550 Standard 02.02 April 1999
or
or
Mate unit must be InSv/ISTb for mate load
Unit must be InSv/ISTb for ACT option.
Request Invalid
Request Invalid