Nortel DMS-100 Series Maintenance Manual page 210

6-22 RLCM-EDC card replacement procedures
NT2X06 NT2X06
in RMM in RMM
(end) (continued)
17
18
19
20
21
297-8381-550 Standard 02.02 April 1999
Return to service the circuits busied in step 5 by typing
>RTS ALL
and pressing the Enter key.
where
rmm_no is the number of the RMM shelf in which the card is to be replaced
If RTS
passed
failed
Send any faulty cards for repair according to local procedure.
Record the following items in office records:
date the card was replaced
serial number of the card
symptoms that prompted replacement of the card
Go to step 21.
Obtain further assistance in replacing this card by contacting the personnel
responsible for higher level of support.
You have completed this procedure.
Do
step 18
step 20