Returning A Card For Repair Or Replacement Rlcm-Edc - Nortel DMS-100 Series Maintenance Manual

11-8 11-8 Routine maintenance procedures
Returning a card for repair or replacement Returning a card for repair or replacement
RLCM-EDC RLCM-EDC
Application
Use this procedure to return a circuit pack to Nortel for repair or
replacement. Your location, Canada or the United States, determines the
documents you must complete. You location determines to which address
you must return the card.
Interval
Perform this procedure as needed.
Common procedures
There are no common procedures.
Action
This procedure contains a summary flowchart and a list of steps. Use the
flowchart to review the procedure. Follow the steps to perform the
procedure.
297-8381-550 Standard 02.02 April 1999
11-8