Ripng Metricout; Ripng Poison-Reverse - HP FlexNetwork 3600 v2 Series Command Reference Manual

Use undo ripng metricin to restore the default.
By default, the additional metric to received routes is 0.
Related commands: ripng metricout.
Examples
# Specify the additional routing metric as 12 for RIPng routes received by VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng metricin 12

ripng metricout

Syntax
ripng metricout value
undo ripng metricout
View
Interface view
Default level
2: System level
Parameters
value: Additional metric to advertised routes, in the range of 1 to 16.
Description
Use ripng metricout to configure an additional metric for RIPng routes advertised by an interface.
Use undo rip metricout to restore the default.
The default additional routing metric is 1.
Related commands: ripng metricin.
Examples
# Set the additional metric to 12 for routes advertised by VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng metricout 12

ripng poison-reverse

Syntax
ripng poison-reverse
undo ripng poison-reverse
View
Interface view
Default level
2: System level
280