Display Ipv6 Routing-Table - HP 6125XLG Command Reference Manual

Field
Flags
Metric
Ref
Use
Iface

display ipv6 routing-table

Use display ipv6 routing-table to display IPv6 routing information.
Syntax
display ipv6 routing-table
Views
Any view
Examples
# Display IPv6 routing information.
<boot> display ipv6 routing-table
Kernel IPv6 routing table
Destination
::1/128
FE80::201:2FF:FE03:406/128
FE80::/64
FF02::1:2/128
FF00::/8
Table 35 Command output
Field
Kernel IPv6 routing table
Flags
Metric
Description
Flags:
•
A—The route was learnt by the route advertisement.
•
C—The route is cached.
•
D—The route is the default route learned through the ND protocol.
•
G—The destination address is a gateway.
•
H—The route is a host route.
•
U—This flag is reserved for future use.
Cost of the route.
Number of times the route has been referenced by other route entries.
Number of times the route has been matched.
Outbound interface.
Description
IPv6 routing information.
Flags:
•
A—The route was learned by the RA.
•
C—The route is cached.
•
D—The route is the default route learned through ND.
•
G—The destination address is a gateway.
•
H—The route is a host route.
•
U—This flag is reserved for future use.
Cost of the route.
192
Next Hop Flags Metric Ref
:: U 0
:: U 0
:: U 256
FF02::1:2 UC 0
:: U 256
Use Iface
0 1 lo
0 1 lo
0 0 m-eth0
2888 0 m-eth0
0 0 m-eth0