Setting An Ip Address In The Browser Interface - HP 10Base-T Hub 24M Manual

Configuration Reference
Figure 6-15. The IP Settings Window

Setting an IP Address in the Browser Interface

To set an IP Address on the hub using the Browser Interface, perform the
following steps:
1.
2.
3.
4.
6-34
From the Tab Bar, click on the Configuration tab. The Browser Interface
displays the Configuration Button Bar.
From the Configuration Button Bar, click on the IP Configuration Button.
The Browser Interface displays the IP Configuration Window.
To manually configure network values, make sure the IP Configuration
list box is set to Manual.
Type IP Address, Subnet Mask, Default Gateway and Time to Live values
in the appropriate fields and click on the Apply Changes button.
Use the IP
Configuration List
Box to select
either a manual or
automatic (Bootp
or DHCP) address
setting session.