Display Mac-Address Aging-Time - HP 12500 Series Command Reference Manual

If you execute this command without specifying any parameters, it displays all MAC address entries.
Examples
# Display MAC address entries for VLAN 100.
<Sysname> display mac-address vlan 100
MAC Address
0001-0101-0101
0033-0033-0033
0000-0000-0002
00e0-fc00-5829
# Display the total number of MAC address entries.
<Sysname> display mac-address count
1 mac address(es) found.
Table 1 Command output
Field
VLAN ID
State
Port/NickName
Aging
mac address(es) found
Related commands
mac-address
•
mac-address timer
•

display mac-address aging-time

Use display mac-address aging-time to display the aging timer for dynamic MAC address entries.
Syntax
display mac-address aging-time
Views
Any view
VLAN ID State
100 Multiport
100 Blackhole
100 Static
100 Learned
Description
ID of the VLAN to which the outgoing interface of the MAC address entry
belongs.
MAC address entry state:
•
Static—Static MAC address entry.
• Learned—Dynamic MAC address entry. Dynamic entries can be
manually configured, or learned.
• Blackhole—Blackhole MAC address entry.
• Multiport—Multiport unicast MAC address entry.
Interface name or nickname. This field indicates the outgoing interface for
frames that are destined for the MAC address. This field displays N/A for a
blackhole MAC address entry.
Aging time:
• Y—The entry is aging.
•
N—The entry does not age.
Number of matching MAC address entries.
Port/NickName
GE3/0/1
GE3/0/2
N/A
GE3/0/3
GE3/0/4
2
Aging
N
N
N
Y