Resetting Phone And Configuration; Reset To Factory Configuration - Yealink SIP-T2 Series Administrator's Manual

Resetting Phone and Configuration

Generally, some common issues may occur while using the IP phone. You can reset your phone to factory con-
figurations after you have tried all troubleshooting suggestions, but still do not solve the problem. Resetting the phone
to factory configurations clears the flash parameters, removes log files, user data, and cached data, and resets the
administrator password to admin. All custom settings will be overwritten after resetting.
Six ways to reset the phone:
Reset local settings: All configurations saved in the <MAC>-local.cfg file on the IP phone will be reset. Changes
l
associated with non-static settings made via web user interface and phone user interface are saved in the <MAC>-
local.cfg file.
Reset non-static settings: All non-static parameters will be reset. After resetting the non-static settings, the IP
l
phone will perform auto provisioning immediately.
Reset static settings: All static parameters will be reset.
l
Reset userdata & local config: All the local cache data (for example, user data, history or directory) will be cleared.
l
And all configurations saved in the <MAC>-local.cfg configuration file on the IP phone will be reset.
Reset to Factory: All configurations on the phone will be reset.
l
Reset a configuration at a time
l
You can reset the IP phone to default factory configurations. The default factory configurations are the settings that
reside on the IP phone after it has left the factory. You can also reset the IP phone to custom factory configurations if
required. The custom factory configurations are the settings that defined by the user to keep some custom settings
after resetting. You have to import the custom factory configuration files in advance.
Note
Reset local settings Reset non-static settings
The /
web user interface appears only if "static.auto_provision.custom.protect" is set to 1.
Topics

Reset to Factory Configuration

Resetting the IP phone to Default Factory Settings
Resetting a Configuration to Default Factory Setting
Resetting the IP phone to Custom Factory Settings
Deleting the Custom Factory Settings Files
Reset to Factory Configuration
The following table lists the parameters you can use to configure reset to factory.
Reset static settings Reset userdata & local config
/ /
Troubleshooting Methods
option on the
521