Yealink SIP-T2 Series Administrator's Manual page 188

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
softkey.1.position = 3
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1 (Enabled).
Integer from 0 to 10
If it is set to 0, the soft key X is located in the first available position from the left.
Permitted
Values
If it is set to other values, a More soft key appears and the soft key X is located in the specified position.
The following soft keys are moved by one position to the right. Press the More soft key to view the
remaining soft keys.
Default 0
Parameter softkey.X.action
It configures the action or function for custom soft key X.
This value uses the same macro action string syntax as an Enhanced DSS key.
You can also invoke the EDK macro that was already defined. The macro name follows the character "!".
Description Example:
softkey.1.action = !macro1
In this example, macro1 stands for the macro name configured by the parameter "edk.edklist.X.mname".
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1 (Enabled).
Permitted
String
Values
Default Blank
Parameter softkey.X.softkey_id
It configures the softkey id for custom soft key X.
Example:
Description
softkey.1.softkey_id = custom_macro1
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1 (Enabled).
Permitted
String
Values
Default Blank
Parameter softkey.X.use.idle
It enables or disables the custom soft key X to be displayed in the idle state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1 (Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default 0
Parameter softkey.X.use.incoming_call
It enables or disables the custom soft key X to be displayed in the alerting (ringing) state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1 (Enabled).
Permitted 0-Disabled
Values 1-Enabled
182
[1]
[1]
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg