Yealink SIP-T2 Series Administrator's Manual page 518

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
0-Disabled, the IP phone will not prompt the incoming call information when the user is dialing or select-
ing a contact from the directory/call log lists to transfer a call/to set up a conference/to place a new call.
Permitted
1-Enabled, the IP phone will return to the dialing screen if there is an incoming call arrives when the user
Values
selects a contact from the directory/call log lists to transfer a call/to set up a conference with/to place a
new call.
Default 1
Parameter phone_setting.end_call_net_disconnect.enable
Description It enables or disables the IP phone to end the call if the network is unavailable during the call.
0-Disabled
Permitted
Values
1-Enabled, the IP phone will end the call and go to the Idle screen after 5 seconds.
Default 0
Parameter features.station_name.value
It configures station name to be displayed on the top-left corner of the LCD screen.
Note: The text displayed might be truncated if "features.station_name.scrolling_display" is set to 0 (Dis-
Description
abled). For T42G/T42S/T41P/T41S/T27G IP phones, the station name is displayed in the middle bottom of
the idle screen.
Blank (the label of the default account will be displayed)
Permitted
Values
String
Default Blank
Parameter features.station_name.scrolling_display
Description It enables or disables the IP phone to scroll the string display on the top-left corner of the LCD screen.
Permitted
0-Disabled
1-Enabled
Values
Default 1
Parameter phone_setting.incoming_call.reject.enable
Description It enables or disables the user to manually reject an incoming call on the phone.
0-Disabled, the Reject soft key disappears from the incoming call screen; pressing X/Mute key, tap the
Permitted
on-hook key or using action URI to reject the call is not permitted.
Values
1-Enabled
Default 1
Parameter features.call_out_directory_by_off_hook.enable
It enables or disables the IP phone to automatically dial out the selected contact from Directory once you
press the off-hook key.
Description
Note: It is only applicable to CP920 IP phones.
Permitted
0-Disabled
1-Enabled
Values
Default 0
512
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg