Yealink SIP-T2 Series Administrator's Manual page 175

Values 1-Network CallLog (only appear when "bw.enable=1" and "bw.xsi.call_log.enable=1")
Default 0
Web UI Dsskey->Programmable Key->Line
Parameter programablekey.X.line
It configures the desired line to apply the programmable key feature.
Description
Note: It is not applicable to T19(P) E2 IP phones.
T48G/T48S/T54S/T46G/T46S/T29G: 1-16;
T52S/T42S/T42G: 1-12;
T41S/T41P/T27G: 1-6;
T40P/T40G/T23P/T23G: 1-3;
T21(P) E2: 1-2;
CP920: 1, 101, 102.
Permitted
Values
1-Line 1
2-Line 2
...
16-Line 16
101-PSTN1
102-PSTN2
Default 1
Web UI Dsskey>Programmable Key->Line
Parameter programablekey.X.value
It configures the value for some programmable key features.
For example, when you assign the Speed Dial to the programmable key, this parameter is used to specify
the contact number you want to dial out. It is also used to specify the contact number with the DTMF
Description
sequence. The contact number and DTMF sequence are separated by commas.
Note: You need to configure this parameter when "programablekey.X.type" is set to 2, 9, 13, 14, 23, 24, 27,
40 or 73.
Permitted
String within 99 characters
Values
Default Blank
Web UI Dsskey->Programmable Key->Value
programablekey.X.label
Parameter
(X=1-4)
It configures the label displayed on the phone screen for a specific programmable key.
Description
This is an optional configuration.
Permitted String within 99 characters
[1]
[1]
[1]
Phone Customization
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
169