Yealink SIP-T2 Series Administrator's Manual page 498

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Parameter bw.virtual_user.1.xsi.host
It configures the IP address of the Xtended Services Platform server for the virtual account.
Description
Note: It works only if "bw.xsi.enable" is set to 1 (Enabled). It is not applicable to
T48G/T46G/T42G/T41P/T29G IP phones.
Permitted
IP address or domain name
Values
Default Blank
Parameter bw.virtual_user.1.xsi.server_type
It configures the access protocol of the Xtended Services Platform server for the virtual account.
Description
Note: It works only if "bw.xsi.enable" is set to 1 (Enabled). It is not applicable to
T48G/T46G/T42G/T41P/T29G IP phones.
Permitted
HTTP or HTTPS
Values
Default Blank
Parameter bw.virtual_user.1.xsi.port
It configures the port of the Xtended Services Platform server for the virtual account.
Description
Note: It works only if "bw.xsi.enable" is set to 1 (Enabled). It is not applicable to
T48G/T46G/T42G/T41P/T29G IP phones.
Permitted
Integer from 1 to 65535
Values
Default 80
Parameter account.X.reason_code.Y
It configures the unavailable/away code which must match one of the codes configured on BroadWork-
Description
s/Star2Star platform.
Permitted
Integer from 1 to 2147483647
Values
Default Blank
Parameter account.X.reason_code_name.Y
It configures the unavailable/away reason which must match one of the reasons configured on
Description
BroadWorks/Star2Star platform.
Permitted
String within 99 characters
Values
Default Blank
Parameter account.X.bw_disp_code.Y
Description It configures the disposition code which must match one of the codes configured on BroadWorks.
Permitted
Integer from 1 to 2147483647
Values
Default Blank
Parameter account.X.bw_disp_code_name.Y
492
[1][2]
[1][2]
[1][2]
[1][2]
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg