Reserve # In User Name Configuration; Busy Tone Delay; Busy Tone Delay Configuration - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
From: "1010" <sip:1010%23@10.2.1.48:5060>;tag=1945988802
To: <sip:2@10.2.1.48:5060>
Call-ID: 0_2336101648@10.3.20.6
CSeq: 1 INVITE
Contact: <sip:1010%23@10.3.20.6:5060>
Content-Type: application/sdp
Allow: INVITE, INFO, PRACK, ACK, BYE, CANCEL, OPTIONS, NOTIFY, REGISTER, SUBSCRIBE, REFER, PUBLISH, UPDATE,
MESSAGE
Max-Forwards: 70
User-Agent: Yealink SIP-T46G 28.82.0.20
Allow-Events: talk,hold,conference,refer,check-sync
Content-Length: 300
Topic

Reserve # in User Name Configuration

Reserve # in User Name Configuration
The following table lists the parameter you can use to configure reserve # in user name.
Parameter sip.use_23_as_pound
Description It enables or disables the IP phone to reserve the pound sign (#) in the user name.
Permitted 0-Disabled (convert the pound sign into "%23")
Values 1-Enabled
Default 1
Web UI Features->General Information->Reserve # in User Name

Busy Tone Delay

The busy tone is audible to indicate that the call is released by the other party. You can define the amount of time to
play the busy tone.
Topic

Busy Tone Delay Configuration

Busy Tone Delay Configuration
The following table lists the parameter you can use to configure busy tone delay.
Parameter features.busy_tone_delay
It configures the duration time (in seconds) to play the busy tone when the call is released by the remote
Description
party.
Permitted 0-0s, the IP phone will not play a busy tone.
478
<y0000000000xx>.cfg
<y0000000000xx>.cfg