Yealink SIP-T2 Series Administrator's Manual page 494

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Description It enables or disables the XSI authentication feature for the IP phone.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the following features are unavailable on the phone:
BroadWorks Anywhere
Remote Office
Line ID Blocking
Anonymous Call Rejection
Simultaneous Ring Personal
BroadSoft Directory
Permitted
BroadSoft Call Log
Values
Call Park Feature via XSI Mode
Call Waiting Feature via XSI Mode
Voice Messaging/Video Voice Messaging
Centralized Call Recording
Executive and Assistant
BroadWorks Mobility
Group Night Forwarding
Silent Altering
Default 0
Parameter sip.authentication_for_xsi
It configures the authentication mechanism for the XSI access.
Description
Note: It works only if "bw.xsi.enable" is set to 1 (Enabled).
0-User Login Credentials for XSI Authentication), the IP phone uses the XSI user ID and password for XSI
authentication.
Permitted
Values
1-SIP Credentials for XSI Authentication, the IP phone uses the XSI user ID, the register name and pass-
word of the SIP account for XSI authentication.
Default 0
Web UI Applications->Broadsoft XSI->XSI Account->Allow SIP Authentication for XSI (if bw.enable=1)
Parameter default_input_method.xsi_password
It configures the default input method when the XSI authentication is failed and the user re-enters the
Description
password.
Permitted
123, abc, ABC or 2aB
Values
Default 2aB
488
<y0000000000xx>.cfg
<y0000000000xx>.cfg