Viewing The Syslog Messages On Your Syslog Server; Resetting Phone And Configuration - Yealink SIP-T3 Administrator's Manual

23-Local Use 7 (Local7)
Note: Note 1 - Various operating systems have been found to utilize Facilities 4, 10, 13 and 14 for
security/authorization, audit, and alert messages which seem to be similar. Note 2 - Various operating
systems have been found to utilize both Facilities 9 and 15 for clock (cron/at) messages.
Default
16
Web UI
Settings > Configuration > Syslog > Syslog Facility
Parameter static.syslog.prepend_mac_address.enable
It enables or disables the phone to prepend the MAC address to the log messages exported to the sys-
Description
log server.
Permitted 0-Disabled
Values 1-Enabled
Default 0
Web UI Settings > Configuration > Syslog > Syslog Prepend MAC

Viewing the Syslog Messages on Your Syslog Server

You can view the syslog file in the desired folder on the syslog server. The location of the folder may differ from the
syslog server. For more information, refer to the network resources.
The following figure shows a portion of the syslog:

Resetting Phone and Configuration

Generally, some common issues may occur while using the IP phone. You can reset your phone to factory con-
figurations after you have tried all troubleshooting suggestions, but still do not solve the problem. Resetting the
phone to factory configurations clears the flash parameters, removes log files, user data, and cached data, and
resets the administrator password to admin. All custom settings will be overwritten after resetting.
Six ways to reset the phone:
Reset local settings: All configurations saved in the <MAC>-local.cfg file on the phone will be reset. Changes
l
associated with non-static settings made via the web user interface and phone user interface are saved in the
<MAC>-local.cfg file.
Reset non-static settings: All non-static parameters will be reset. After resetting the non-static settings, the
l
phone will perform auto provisioning immediately.
Reset static settings: All static parameters will be reset.
l
Reset userdata & local config: All the local cache data (for example, user data, history or directory) will be
l
cleared. And all configurations saved in the <MAC>-local.cfg configuration file on the phone will be reset.
Troubleshooting Methods
<y0000000000xx>.cfg
607