Blf Key For Intercom Configuration; Call Information Display Configuration; Shared Line - Yealink SIP-T2 Series Administrator's Manual

Example:
blf.enhanced.dnd.led = $LEDg1000o$
For T54S/T52S/T46S/T42S/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2 IP phones, the BLF/BLF List DSS
key LED glows green for 1000ms and then goes out.
For T48S IP phones, the BLF/BLF List DSS key field displays a green icon for 1000ms and then turns to
white.
Note: It works only if "blf.enhanced.dnd.enable" is set to 1 (Enabled). It is not applicable to
T48G/T46G/T42G/T41P/T19(P) E2/CP920 IP phones.
Permitted
String
Values
Default Blank

BLF Key for Intercom Configuration

The BLF key (not include BLF List key) can also be used to initiate an intercom call.
The following table lists the parameter you can use to configure BLF key for Intercom.
Parameter features.blf.intercom_mode.enable
It enables or disables the IP phone to initiate an outgoing intercom call with a monitored user when press-
ing the BLF key.
Description
Note: To use this feature, you also need to configure the intercom mode (configured by the parameter
"features.intercom.mode"). It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
0-Disabled
1-Enabled
Values
Default 0

Call Information Display Configuration

The following table lists the parameter you can use to configure call information display.
Parameter features.blf.show_callinfo.enable
It enables or disables the IP phone to display the call information by long pressing the BLF/BLF List key.
Description
Note: It is not applicable to T48G/T46G/T42G/T41P/T29G/T19(P) E2/CP920 IP phones.
0-Disabled
Permitted 1-Enabled, when the monitored line is ringing, during a call, or has a parked call, users can long press the
BLF/BLF List key to view the call information, and then select to pick up the incoming call, barge in a con-
Values
ference, or retrieve the parked call.
Default 1

Shared Line

Yealink IP phones support Shared Call Appearance (SCA) and Bridged Line Appearance (BLA) to share a line. Shared
call appearances and bridged line appearances are similar signaling methods that enable more than one phone to
share the same line or registration. The methods you use vary with the SIP server you are using.
The shared line users have the ability to do the following:
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Advanced Features
431