Yealink SIP-T2 Series Administrator's Manual page 86

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Default Blank
static.autoprovision.X.user
Parameter
It configures the user name for authentication during auto provisioning which is triggered by activation
Description
code.
Permitted
String within 64 characters
Values
Default Blank
static.autoprovision.X.password
Parameter
It configures the password for authentication during auto provisioning which is triggered by activation
Description
code.
Permitted
String within 32 characters
Values
Default Blank
Parameter static.auto_provision.dns_resolv_nosys
It enables or disables the IP phone to resolve the access URL of the provisioning server using download
libraries mechanism.
Description
Note: It is only applicable to T41P/T42G/CP920 IP phones.
0-Disabled, the IP phone resolves the access URL of the provisioning server using the system mech-
Permitted
anism.
Values
1-Enabled
Default 1
Parameter static.auto_provision.dns_resolv_nretry
It configures the retry times when the IP phone fails to resolve the access URL of the provisioning server.
Description
Note: For each different DNS server, it works only if "static.auto_provision.dns_resolv_nosys" is set to 1
(Enabled).
Permitted
Integer from 1 to 10
Values
Default 2
Parameter static.auto_provision.dns_resolv_timeout
It configures the timeout (in seconds) for the phone to retry to resolve the access URL of the pro-
visioning server.
Description
Note: For each different DNS server, it works only if "static.auto_provision.dns_resolv_nosys" is set to 1
(Enabled).
Permitted
Integer from 1 to 60
Values
Default 5
[1]
X is an activation code ID. For all IP phones, X=1-50.
[2]
If you change this parameter, the IP phone will reboot to make the change take effect.
80
[1][2]
[1][2]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg