Yealink SIP-T2 Series Administrator's Manual page 314

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Parameter features.forward.emergency.enable
It enables or disables the IP phone to receive the call from authorized numbers when the call forward fea-
ture is activated.
Description
Note: It works only if "features.fwd.allow" is set to 1 (Enabled).
0-Disabled
Permitted
1-Enabled, the call from authorized numbers will not be forwarded when the call forward feature is activ-
Values
ated.
Default 0
Web UI Features->Forward&DND->Forward->Forward Emergency
Parameter features.forward.emergency.authorized_number
It configures the authorized numbers.
The call from the authorized numbers cannot be forwarded even if the call forward feature is activated.
Description
Multiple numbers are separated by commas.
Note: It works only if "features.fwd.allow" and "features.forward.emergency.enable" are set to 1
(Enabled).
Permitted
String within 511 characters
Values
Default Blank
Web UI Features->Forward&DND->Forward->Forward Authorized Numbers
Parameter forward.international.enable
It enables or disables the IP phone to forward incoming calls to international numbers (the prefix is 00).
Description
Note: For Yealink IP phones, it works only if "features.fwd.allow" is set to 1 (Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default 1
Web UI Features->General Information->Fwd International
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin)->FWD International->FWD International
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Advanced Settings (default password: admin) ->FWD International->FWD Inter-
national
Parameter forward.idle_access_always_fwd.enable
It enables or disables the IP phone to always enter the Always Forward setting screen when pressing the
Description
Forward key on the Idle screen.
0-Disabled. When pressing the Forward key, the IP phone may activate/deactivate the call forward or
Permitted
enter the Always Forward/Busy Forward/No Answer Forward setting screen.
Values
1-Enabled
Default 0
308
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg