Yealink SIP-T2 Series Administrator's Manual page 501

Parameter bw.virtual_user.1.xsi.dnd.enable
It enables or disables the DND feature for the call center.
Note: It works only if "bw.xsi.enable" is set to 1 (Enabled). It is not applicable to SIP-
Description
T48G/T46G/T42G/T41P/T29G IP phones. If you leave it blank, the virtual user name uses VirtualUser1 by
default.
0-Disabled
Permitted
Values
1-Enabled, all agents in the call center reject incoming calls automatically.
Default 0
Parameter bw.virtual_user.1.xsi.user
Configures the user ID of the call center for XSI access authentication.
Description
Note: It works only if "bw.xsi.enable" is set to 1 (Enabled). It is not applicable to SIP-
T48G/T46G/T42G/T41P/T29G IP phones.
Permitted
String within 99 characters
Values
Default Blank
Parameter bw.virtual_user.1.xsi.password
It configures the password of the call center for XSI access authentication.
Note: It works only if "bw.xsi.enable" is set to 1 (Enabled) and it is required only when the value of the
Description
parameter "sip.authentication_for_xsi" is set to 0 (User Login Credentials for XSI Authentication). It is not
applicable to SIP-T48G/T46G/T42G/T41P/T29G IP phones.
Permitted
String within 99 characters
Values
Default Blank
Parameter bw.virtual_user.1.xsi.host
It configures the IP address of the Xtended Services Platform server for call center.
Description
Note: It works only if "bw.xsi.enable" is set to 1 (Enabled). It is not applicable to SIP-
T48G/T46G/T42G/T41P/T29G IP phones.
Permitted
IP address or domain name
Values
Default Blank
Parameter bw.virtual_user.1.xsi.server_type
It configures the access protocol of the Xtended Services Platform server for call center.
Description
Note: It works only if "bw.xsi.enable" is set to 1 (Enabled).It is not applicable to SIP-
T48G/T46G/T42G/T41P/T29G IP phones.
Permitted
HTTP or HTTPS
Values
Default HTTP
Configuration Parameters
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
495