Vq-Rtcpxr Display; Vq-Rtcpxr Display Configuration - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
For example, if it is set to 500, when the value of one way delay computed by the phone is greater than or
equal to 500, the phone will send a warning alert quality report to the central report collector; when the
value of one way delay computed by the phone is less than 500, the phone will not send a warning alert
quality report to the central report collector.
If it is set to blank, warning alerts are not generated due to one-way delay. One-way delay includes both
network delay and end system delay.
Permitted
10 to 2000
Values
Default Blank
Web UI Settings->Voice Monitoring->Warning threshold for Delay
Parameter phone_setting.vq_rtcpxr_delay_threshold_critical
It configures the threshold value of one-way delay (in milliseconds) that causes the phone to send a crit-
ical alert quality report to the central report collector.
For example, if it is set to 500, when the value of one-way delay computed by the phone is greater than or
equal to 500, the phone will send a critical alert quality report to the central report collector; when the
Description
value of one way delay computed by the phone is less than 500, the phone will not send a critical alert
quality report to the central report collector.
If it is set to blank, critical alerts are not generated due to one-way delay. One-way delay includes both
network delay and end system delay.
Permitted
10 to 2000
Values
Default Blank
Web UI Settings->Voice Monitoring->Critical threshold for Delay

VQ-RTCPXR Display

You can check the voice quality data of the last call via web user interface or phone user interface. You can also specify
the options of the RTP status to be displayed on the phone user interface. Options of the RTP status displayed on the
web user interface cannot be specified.
Note
You can configure the softkey layout feature to display the
RTP Status
the soft key to check the voice quality data with different parties. For more information, refer to
out .
Topic

VQ-RTCPXR Display Configuration

VQ-RTCPXR Display Configuration
The following table lists the parameters you can use to configure VQ-RTCPXR display.
phone_setting.vq_rtcpxr.states_show_on_web.en-
Parameter
able
It enables or disables the voice quality data of the last call to be displayed on the web interface at the
Description
path Status->RTP Status.
0-Disabled
Permitted
1-Enabled
370
<y0000000000xx>.cfg
RTP Status
soft key during the conference. Then you can press
<y0000000000xx>.cfg
Softkey Lay-