Recent Call Display In Dialing; Recent Call In Dialing Configuration - Yealink SIP-T2 Series Administrator's Manual

Parameter search_in_dialing.remote_phone_book.priority
Description It configures the search priority of the remote phone book.
Permitted
Integer greater than or equal to 0
Values
Default 3
Web UI Directory->Setting->Search Source List In Dialing
Parameter search_in_dialing.ldap.enable
It enables or disables the IP phone to automatically search entries from the LDAP, and display results on
Description
the pre-dialing/dialing screen.
Permitted
0-Disabled
1-Enabled
Values
Default 0
Web UI Directory->Setting->Search Source List In Dialing
Parameter search_in_dialing.ldap.priority
Description It configures the search priority of the LDAP.
Permitted
Integer greater than or equal to 0
Values
Default 4
Web UI Directory->Setting->Search Source List In Dialing

Recent Call Display in Dialing

Recent call display allows you to view the placed calls list when the phone is on the dialing screen (lifts the handset,
presses the Speakerphone key or desired line key). You can select to place a call from the placed calls list.
The following shows the recent calls displayed on T46S/G IP phones:
Topic

Recent Call in Dialing Configuration

Recent Call in Dialing Configuration
The following table lists the parameter you can use to configure the recent call display in dialing.
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Customization
193