Example: Configuring Visual And Audio Alert For Monitor Lines - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
E2/CP920 IP phones.
Permitted Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav, Ring8.wav, Silent.wav,
Values Splash.wav or custom ring tone name (for example, Config:Customring.wav).
Default Splash.wav
Web UI Features->Pickup & Park->Ring Type for BLF Pickup
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Sound->BLF Ring Type
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2:
Menu->Settings->Basic Settings->Sound->BLF Ring Type
Parameter features.pickup_display.method
It configures the display method of the call party information on the visual prompt.
Description
Note: It works only is "features.pickup.blf_visual_enable" is set to 1 (Enabled). It is not applicable to T19(P)
E2/CP920 IP phones.
0-Name
1-Number
Permitted
Values
2-Name Number
3-Number Name
Default 2
Parameter features.blf_pickup_only_send_code
It enables or disables the phone to only dial out feature access code of directed pick up when performing
BLF/BLF list pickup.
Description
Note: It is not applicable to T19(P) E2/CP920 IP phones.
0-Disabled, the phone will dial out feature access code of directed pick up plus monitored number when
performing BLF/BLF list pickup.
Permitted
Values
1-Enabled, the phone will only dial out feature access code of directed pick up when performing BLF
pickup.
Default 0
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for T41P/T41S/T27G,
X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2.

Example: Configuring Visual and Audio Alert for Monitor Lines

The following example shows the configuration for visual and audio for a monitor line.
Scenario Conditions
linekey.1.pickup_value = *97
or
account.1.direct_pickup_code = *97
or
418
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Related Topic
Line Keys Configuration
Directed Call Pickup