Phone Network; Ipv4 And Ipv6 Network Settings; Ip Addressing Mode Configuration - Yealink SIP-T2 Series Administrator's Manual

Phone Network

Yealink IP phones operate on an Ethernet local area network (LAN) or wireless network. You can configure the local
area network to accommodate a number of network designs, which varies by organization and Yealink IP phones.
Topics

IPv4 and IPv6 Network Settings

DHCP Option for IPv4
DHCP Option for IPv6
VLAN
Wi-Fi
Real-Time Transport Protocol (RTP) Ports
Network Address Translation (NAT)
Internet Port and PC Port
VPN
Quality of Service (QoS)
802.1x Authentication
TR-069 Device Management
IPv4 and IPv6 Network Settings
Yealink IP Phones support IPv4 addressing mode, IPv6 addressing mode, as well as an IPv4&IPv6 dual-stack addressing
mode.
After connected to the wired network, the phones can obtain the IPv4 or IPv6 network settings from a Dynamic Host
Configuration Protocol (DHCP) server if your network supports it. To make it easier to manage IP settings, we recom-
mend using automated DHCP which is possible to eliminate repetitive manual data entry.
You can also configure IPv4 or IPv6 network settings manually.
Note
Yealink IP phones comply with the DHCPv4 specifications documented in
in RFC 3315 .
Topics

IP Addressing Mode Configuration

IPv4 Configuration
IPv6 Configuration
IP Addressing Mode Configuration
The following table lists the parameters you can use to configure IP addressing mode.
Parameter static.network.ip_address_mode
Description It configures the IP addressing mode.
0-IPv4
Permitted
1-IPv6
Values
2-IPv4 & IPv6
RFC 2131
[1]
<y0000000000xx>.cfg
Phone Network
, and DHCPv6 specifications documented
21