Tr069 Configuration - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
RPC Method
This method is used to cause the CPE to upload a specified file to the designated location.
File types supported by IP phones are:
Upload
l
l
This method is used to request the CPE to schedule a one-time Inform method call (separate
ScheduleInform
from its periodic Inform method calls) sometime in the future.
FactoryReset This method resets the CPE to its factory default state.
This method informs the ACS of the completion (either successful or unsuccessful) of a file
TransferComplete
transfer initiated by an earlier Download or Upload method call.
AddObject This method is used to add a new instance of an object defined on the CPE.
DeleteObject This method is used to remove a particular instance of an object.

TR069 Configuration

The following table lists the parameters you can use to configure TR069.
Parameter static.managementserver.enable
Description It enables or disables the TR069 feature.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Web UI Settings->TR069->Enable TR069
Parameter static.managementserver.username
It configures the user name for the IP phone to authenticate with the ACS (Auto Configuration Servers).
Leave it blank if no authentication is required.
Description
Example:
static.managementserver.username = tr69
Permitted
String within 128 characters
Values
Default Blank
Web UI Settings->TR069->ACS Username
Parameter static.managementserver.password
It configures the password for the IP phone to authenticate with the ACS (Auto Configuration Servers).
Leave it blank if no authentication is required.
Description
Example:
static.managementserver.password = tr69
Permitted
String within 64 characters
Values
58
Configuration File
Log File
Description
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg