Yealink SIP-T2 Series Administrator's Manual page 251

Default Blank
Web UI Directory->LDAP->Password
Parameter ldap.max_hits
It configures the maximum number of search results to be returned by the LDAP server. If the value of the
"Max.Hits" is blank, the LDAP server will return all searched results. Please note that a very large value of
the "Max. Hits" will slow down the LDAP search speed, therefore it should be configured according to the
available bandwidth.
Description
Example:
ldap.max_hits = 50
Permitted
Integer from 1 to 1000
Values
Default 50
Web UI Directory->LDAP->Max Hits (1~1000)
Parameter ldap.name_attr
It configures the name attributes of each record to be returned by the LDAP server. It compresses the
search results. You can configure multiple name attributes separated by spaces.
Example:
Description
ldap.name_attr = cn sn
This requires the "cn" and "sn" attributes set for each contact record on the LDAP server.
Permitted
String within 99 characters
Values
Default Blank
Web UI Directory->LDAP->LDAP Name Attributes
Parameter ldap.numb_attr
It configures the number attributes of each record to be returned by the LDAP server. It compresses the
search results. You can configure multiple number attributes separated by spaces.
Example:
Description
ldap.numb_attr = mobile ipPhone
This requires the "mobile" and "ipPhone" attributes set for each contact record on the LDAP server.
Permitted
String within 99 characters
Values
Default Blank
Web UI Directory->LDAP->LDAP Number Attributes
Parameter ldap.display_name
It configures the display name of the contact record displayed on the phone screen.
Description The value must start with "%" symbol.
Example:
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Directory
245