Yealink SIP-T2 Series Administrator's Manual page 174

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
To remove a function type, specify programmable key type IDs which start with the symbol "-". For
example, "-14, 5, 2" means to remove "Intercom", "DND", "Forward" types from the Dsskey function types
list. These programmable key types are not available when you configure programmable keys.
Note: Multiple programmable key type IDs are separated by commas. "N/A" type is always kept.
blank or 0 (all valid function types are available);
Permitted
Dsskey type IDs.
Values
For supported Dsskey types and IDs, refer to
Default Blank
Parameter programablekey.X.type
Description It configures key feature for a specific programmable key.
0-N/A
2-Forward
5-DND
7-ReCall
8-SMS
9-Pick up
Permitted
13-Speed Dial
Values
14-Intercom
22-XML Group
23-Group Pickup
24-Multicast Paging
(Paging)
Note: The permitted values are configurable by "programablekey.type_range.custom".
X=1, default: 28 - History
X=2, default: 61 - Directory
X=3, default: 5 – DND
X=4, default: 30 - Menu
Default
X=5, default: 28- History
X=6, default: 61- Directory
X=7, default: 51- Switch Account Up
X=8, default: 52- Switch Account Down
Web UI Dsskey->Programmable Key->Type
Parameter programablekey.X.history_type
Description It configures the history type of programmable key.
Permitted 0-Local History
168
Supported Dsskey
[1]
27-XML Browser
28-History
30-Menu
32-New SMS
33-Status
34-Hot Desking
38-LDAP (only appear
when "ldap.enable =
1"
40-Prefix
41-Zero Touch
[1]
Types.
<y0000000000xx>.cfg
43-Local Directory (Local Phonebook)
45-Local Group
47-XML Directory (XML Phonebook)
50-Phone Lock
51-Switch Account Up (not applicable to T19(P) E2)
52-Switch Account Down (not applicable to T19(P) E2)
61-Directory
66-Paging List
73-Custom Key (only appear when "features.enhanced_
dss_keys.enable = 1")
85-Favorite (Local Favorite)
X=9, default: 33- Status
X=10, default: 0 - NA
X=11, default: 0 – NA
X=12, default: 0 - NA
X=13, default: 0 – NA
X=14, default: 2- Forward
X=17, default: 0 – NA
X=18, default: 0 – NA
<y0000000000xx>.cfg