Touch Tone; Touch Tone Configuration; Ring Tones; Custom Ringtone Limit - Yealink SIP-T2 Series Administrator's Manual

Default 1
Web UI Features->Audio->Key Tone
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Sound->Key Tone
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Basic Settings->Sound->Key Tone

Touch Tone

If you enable touch tone and tap the keys (except the off-hook key), the phone will produce a sound when it is not on
the dialing/pre-dialing screen and not in a call.
It is only applicable to CP920 IP phones.
Topic

Touch Tone Configuration

Touch Tone Configuration
The following table lists the parameter you can use to configure the touch tone.
Parameter features.touch_tone
It enables or disables touch tone for the IP phone.
Description
Note: It is only applicable to CP920 IP phones.
0-Disabled
Permitted
1-Enabled, when you tap the keys (except the off-hook key), the phone will produce a sound when it is
Values
not on the dialing/pre-dialing screen and not in a call.
Default 1
Web UI Features->Audio->Touch Tone

Ring Tones

Ring tones are used to play for incoming calls. You can select a built-in ring tone or a custom ring tone for the phone
system or specific line registration. To set the custom ring tones, you need to upload the custom ring tones to the IP
phone in advance.
You can also specify a period of time after which the IP phone will stop ringing if the call is not answered.
Topics

Custom Ringtone Limit

Ringtone Configuration
Custom Ringtone Limit
The ring tone format must meet the following:
<y0000000000xx>.cfg
Audio Features
333