Yealink SIP-T2 Series Administrator's Manual page 42

Hide thumbs Also See for SIP-T2 Series:
Table of Contents

Advertisement

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Default
1
Web UI
Network->Advanced->VLAN->WAN Port->VID (1-4094)
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->VLAN->WAN Port->VID Number
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Advanced Settings (default password: admin) ->Network->VLAN->WAN Port->VID
Number
Parameter static.network.vlan.internet_port_priority
It configures the VLAN priority for the Internet port.
Description
7 is the highest priority, 0 is the lowest priority.
Note: It works only if "static.network.vlan.internet_port_enable" is set to 1 (Enabled).
Permitted
Integer from 0 to 7
Values
Default
0
Web UI
Network->Advanced->VLAN->WAN Port->Priority
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->VLAN->WAN Port->Priority
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Advanced Settings (default password: admin) ->Network->VLAN->WAN Port->Pri-
ority
Parameter static.network.vlan.pc_port_enable
It enables or disables the VLAN for the PC port.
Description
Note: It works only if "static.network.pc_port.enable" is set to 1 (Auto Negotiation). It is not applicable to
CP920 IP phones.
Permitted
0-Disabled
1-Enabled
Values
Default
0
Web UI
Network->Advanced->VLAN->PC Port->Active
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu-> Advanced (default password: admin) ->Network->VLAN->PC Port->VLAN Status
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin) ->Network->VLAN->PC Port->VLAN
Status
Parameter static.network.vlan.pc_port_vid
It configures the VLAN ID for the PC port.
Description
Note: It works only if "static.network.pc_port.enable" is set to 1 (Auto Negotiation) and "stat-
ic.network.vlan.pc_port_enable" is set to 1 (Enabled). It is not applicable to CP920 IP phones.
Permitted Integer from 1 to 4094
36
[1]
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg

Advertisement

Table of Contents
loading

Table of Contents