Yealink SIP-T2 Series Administrator's Manual page 525

static.syslog.port = 515
Permitted
Integer from 1 to 65535
Values
Default 514
Web UI Settings->Configuration->Syslog->Syslog Server->Port
Parameter static.syslog.transport_type
It configures the transport protocol that the IP phone uses when uploading log messages to the syslog
Description
server.
0-UDP
Permitted
1-TCP
Values
2-TLS
Default 0
Web UI Settings->Configuration->Syslog->Syslog Transport Type
Parameter static.syslog.level
It configures the lowest level of syslog information that displays in the syslog.
When you choose a log level, it includes all events of an equal or higher severity level and excludes
Description
events of a lower severity level. The logging level you choose determines the lowest severity of events to
log.
0-Emergency: system is unusable
1-Alert: action must be taken immediately
2-Critical: critical conditions
Permitted
3-Critical: error conditions
Values
4-Warning: warning conditions
5-Warning: normal but significant condition
6-Informational: informational messages
Default 3
Web UI Settings->Configuration->Syslog->Syslog Level
Parameter static.syslog.facility
It configures the facility that generates the log messages.
Description
Note: For more information, refer to
0-Kernel Messages
1-User-level Messages
2-Mail System
Permitted
Values
3-System Daemons
4-Security/Authorization Messages (Note 1)
5-Messages are generated internally by syslog
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
RFC 3164.
Troubleshooting Methods
519