Ringtone Configuration - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Phone Model
T54S/T52S/T48S/T46S/T42S/T41S/T27G
T48G/T46G/T29G
T42G/T41P/T40P/T40G/T23P/T23G/T21(P) E2/T19(P)
E2/CP920
Note
The ring tone file must be in PCMU/PCMA audio format, mono channel, 8K sample rate and 16-bit resolution.

Ringtone Configuration

The following table lists the parameters you can use to configure ringtone.
Parameter phone_setting.ring_type
It configures a ring tone for the IP phone.
Description Example:
phone_setting.ring_type = Ring1.wav
Permitted Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav, Ring8.wav, Silent.wav,
Values Splash.wav or custom ring tone name (for example, Customring.wav)
Default Ring1.wav
Web UI Settings->Preference->Ring Type
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Sound->Ring Tones->Common
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Basic Settings->Sound->Ring Tones->Common
Parameter account.X.ringtone.ring_type
It configures a ring tone.
Example:
account.1.ringtone.ring_type = Ring3.wav
Description
It means configuring Ring3.wav for account1.
account.1.ringtone.ring_type = Common
It means account1 will use the ring tone selected for the IP phone configured by the parameter "phone_
setting.ring_type".
Permitted Common, Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav, Ring8.wav,
Values Silent.wav, Splash.wav or custom ring tone name (for example, Customring.wav)
334
Single File
Format
Size
.wav <=8MB
.wav <=8MB
.wav <=100KB
<y0000000000xx>.cfg
[1]
<MAC>.cfg
Note
2MB of space should be reserved for the
phone
2.4MB of space should be reserved for the
phone)
5KB of space should be reserved for the
phone