Yealink SIP-T2 Series Administrator's Manual page 181

Macro Action
$S<softkey ID>$
$K<key name>$
Example: $MAA$ means invoking the EDK macro AA.
The functionality of performing this action is the same as that of pressing the
desired soft key.
Each soft key has a unique identifier on the IP phone, you can configure this
parameter according to the system-defined softkey ID. If the softkey ID is not
defined on the phone or there is no matched soft key on the current screen, the
execution of the action string will be ignored. The softkey ID is case-insensitive.
Example: $Sanswer$ means pressing the Answer soft key.
Yealink IP phones support customizing soft keys. When invoking a custom soft
key, the prefix "#" must be added.
Example: If the custom softkey label is IVR1, the custom softkey ID is custom_
macro, then $S#custom_macro$ means pressing the IVR1 soft key.
Note: To view the softkey ID, you can set "features.enhanced_dss_keys.enable"
and "edk.id_mode.enable" to 1 (Enabled) and then long press the Volume Up key
when the phone is idle.
The functionality of performing this action is the same as that of pressing the
desired hard key.
Supported key names include:
LineKeyX (for T48S/G, X=1-29; for T54S/T46S/T46G/T29G, X=1-27; for
l
T42S/T42G/T41S/T41P, X=1-15; for T52S/T27G, X=1-21; for
T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2).
SoftKeyX (X ranges from 1 to 4)
l
ArrowUp
l
ArrowDown
l
ArrowLeft
l
ArrowRight
l
VolDown
l
VolUp
l
Cancel
l
OK
l
DialPadX (X ranges from 0 to 9)
l
DialPadPound
l
DialPadStar
l
Headset
l
Mute
l
Message
l
Hold
l
Redial
l
Transfer
l
Speaker
l
Conference
l
Phone Customization
Description
175