Accessing The Web User Interface; Quick Login Configuration - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones

Accessing the Web User Interface

Procedure
1. Find the phone IP address. Press the OK key when the phone is idle or navigate to Menu->Status on the phone.
2. Enter the IP address in the address bar of a web browser on your PC.
For example, for IPv4: http://192.168.0.10 or 192.168.0.10; for IPv6: http://[2005:1:1:1:215:65ff:fe64:6e0a] or
[2005:1:1:1:215:65ff:fe64:6e0a]
3. Enter the user name and password.
4. Click Login.
Related Topics
Web Server Type Configuration
User and Administrator Identification

Quick Login Configuration

You can access to the web user interface quickly using the request URI "https://username:password@phoneIPAddress"
(for example, https://admin:admin@192.168.0.10). It will locate you in the Status web page after accessing the web
user interface. It is helpful to quickly log into the web user interface without entering the username and password in
the login page.
Yealink IP phones support domain name customization. You can use a custom domain name to access the web user
interface.
Note
Accessing the web user interface by request URI may be restricted by the web explorer (e.g., Internet Explorer).
For security purposes, we recommend you to use this feature in a secure network environment.
The following table lists the parameters you can use to configure quick login.
Parameter wui.quick_login
It enables or disables the quick login feature.
Description
Note: It works only if "static.wui.https_enable" is set to 1 (Enabled).
0-Disabled
Permitted
1-Enabled, you can quickly log into the web user interface using a request URI (for example, https://ad-
Values
min:admin@192.168.0.10).
Default 0
Parameter wui.secure_domain_list
It configures the valid domain name to access the web user interface of the IP phone.
Multiple domain names are separated by semicolons.
Example:
Description
wui.secure_domain_list = test.abc.com
You are only allowed to use test.abc.com or IP address to access the web user interface of the IP phone.
Note: To use a domain name to access the web user interface of the IP phone, make sure your DNS server
can resolve the domain name to the IP address of the IP phone.
70
<y0000000000xx>.cfg
<y0000000000xx>.cfg