Csta Control Configuration; Action Url; Pre-Defined Events List - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones

CSTA Control Configuration

CSTA Control Configuration
The following table lists the parameter you can use to configure CSTA control.
Parameter features.csta_control.enable
It enables or disables the uaCSTA (User Agent Computer Supported Telecommunications Applications) fea-
ture on the IP phone.
Description
Note: It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
0-Disabled
1-Enabled
Values
Default 0
Web UI Features->Remote Control->CSTA Control
[1]If you change this parameter, the IP phone will reboot to make the change take effect.

Action URL

Action URL allows IP phones to interact with web server applications by sending an HTTP or HTTPS GET request.
You can specify a URL that triggers a GET request when a specified event occurs. Action URL can only be triggered by
the pre-defined events (for example, Open DND). The valid URL format is: http(s)://IP address of the server/help.xml? .
An HTTP or HTTPS GET request may contain a variable name and a variable value, separated by "=". Each variable value
starts with $ in the query part of the URL. The valid URL format is: http(s)://IP address of server/help.xml?variable name-
e=$variable value . The variable name can be customized by users, while the variable value is pre-defined. For example,
a URL "http://192.168.1.10/help.xml?mac=$mac" is specified for the event Mute, $mac will be dynamically replaced
with the MAC address of the IP phone when the IP phone mutes a call.
Topics

Pre-defined Events List

Variable Values List
Action URL Configuration
Pre-defined Events List
The following table lists the pre-defined events for action URL.
Event
Setup Completed
Registered
Unregistered
Register Failed
Off Hook
On Hook
Incoming Call
440
[1]
When the IP phone completes startup.
When the IP phone successfully registers an account.
When the IP phone logs out of the registered account.
When the IP phone fails to register an account.
When the IP phone is off hook.
When the IP phone is on hook.
When the IP phone receives an incoming call.
<y0000000000xx>.cfg
Description