Label Length For Line Key Display - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones

Label Length for Line Key Display

By default, the line key label only displays the first few characters when the length of the label exceeds the maximum
length. You can specify the line key label length as needed. It is only applicable to T54S/T48S/T48G/T46S/T46G/T29G IP
phones.
When label length feature is set to Default:
When label length feature is set to Extended:
For T54S/T46S/T46G/T29G IP phones, the display length of the line key label is extended and the characters are dis-
l
played in one line.
For T48S/G IP phones, the characters are displayed in two lines.
l
When label length feature is set to Mid Range (not applicable to T48S/G IP phones):
Topic
Label Length Display Configuration
114