Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Topic
Ignoring Incoming Calls Configuration
Ignoring Incoming Calls Configuration
The following table lists the parameter you can use to configure ignoring incoming calls.
Parameter features.ignore_incoming_call.enable
Description It enables or disables the IP phone to ignore the incoming call.
0-Disabled
Permitted
1-Enabled, the incoming call is still in the progress and is not rejected, the user can choose to answer it or
Values
not, or perform other features.
Default
0
Off Hook Answering
You can set whether to answer an incoming call by picking up the handset, pressing the Speakerphone key or pressing
the HEADSET key directly.
It is not applicable to CP920 phones.
Topic
Off Hook Answering Configuration
Off Hook Answering Configuration
The following table lists the parameter you can use to configure off hook answering.
Parameter features.off_hook_answer.enable
It enables or disables the IP phone to answer an incoming call by picking up the handset, pressing the
Speakerphone key or pressing the HEADSET key directly.
Description
Note: It is not applicable to CP920 IP phones.
0-Disabled, the user needs to press the corresponding line key, the Answer soft key or the OK key to
Permitted
answer an incoming call after picking up the handset, pressing the Speakerphone key or pressing the
Values
HEADSET key.
1-Enabled
288
<y0000000000xx>.cfg
<y0000000000xx>.cfg