Yealink SIP-T2 Series Administrator's Manual page 186

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Default Default
Parameter edk.edkprompt.X.type
It configures the type of characters entered by the user for user input prompt X.
If it is set to numeric, the default input method is 123, and you can switch among abc/ABC/2aB input
methods.
If it is set to text, the default input method is abc, and you can switch among ABC/2aB/123 input meth-
ods.
Description
Example:
edk.edkprompt.1.type = numeric
Note: It works only if "features.enhanced_dss_keys.enable" and "edk.edkprompt.X.enable" are set to 1
(Enabled).
Permitted
text or numeric
Values
Default text
Parameter edk.edkprompt.X.userfeedback
It configures the user input feedback method for user input prompt X.
Example:
Description
edk.edkprompt.1.userfeedback = masked
Note: It works only if "features.enhanced_dss_keys.enable" and "edk.edkprompt.X.enable" are set to 1
(Enabled).
visible-the entered text is visible.
Permitted
Values
masked-the entered text is displayed as asterisk characters "*". It can be used to mask password fields.
Default visible
Parameter edk.edkprompt.X.title
It configures the text string used as a title for the user input prompt X. The title appears at the top of the
user input prompt screen.
If it is left blank, EDK Prompt is displayed.
Description Example:
edk.edkprompt.1.title = MyTitle
Note: It works only if "features.enhanced_dss_keys.enable" and "edk.edkprompt.X.enable" are set to 1
(Enabled). It is not applicable to T48S/T48G/T46G/T42G/T41P/T29G IP phones.
Permitted
String
Values
Default EDK Prompt
[1]
X is the prompt ID. X=1-10.
180
[1]
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg