Linekey Length In Short; Linekey Length Shorten Rules - Yealink SIP-T2 Series Administrator's Manual

Hide thumbs Also See for SIP-T2 Series:
Table of Contents

Advertisement

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
It configures the alignment mode of line key/ext key label.
Note: It is only applicable to T54S/T52S/T46S/T46G/T29G IP phones and EXP50 expansion modules con-
Description
nected to the T54S/T52S IP phones. If some ext keys already exist before configuration, you need to
refresh the page (press the page keys, or try re-connecting the expansion module) to make the change
take effect.
0-the label and icon align left
Permitted
1-when the line key/ext key is on the left side of the screen, the label and icon align left; when the line
Values
key/ext key is on the right side of the screen, the label and icon align right
Default
0

Linekey Length in Short

Linekey length in short allows IP phones to shorten the line key label when the phone places a call, receives a call, is
during a call, or is idle (if large DND icon appears). You can configure the phone to display 2 characters or nothing. It is
only applicable to T52S IP phones.
The following figures show examples of label display:
Topics

Linekey Length Shorten Rules

Linekey Length in Short Configuration
Linekey Length Shorten Rules
If you configure the phone to display 2 characters, the display will match the rules below:
Label
Short Label
Configured
Any string or Blank
(for example,
aLine1)
Configured
(for example, aLine1)
Blank
(for example, sunny)
Blank
Blank
116
"Short Label" has higher priority than "Label". If the value of "Short Label" is con-
figured, the value of "Label" is ignored.
Display the first two characters of the short label (for example, aL).
• If the label contains uppercase characters or digits, only the uppercase char-
acters and digits are displayed. It displays two characters from left to right (for
example, L1).
• else, it displays the first two characters of the label (for example, su).
If both left blank, the default label is used. The display rule is the same as above.
Description

Advertisement

Table of Contents
loading

Table of Contents