Area Code Configuration - Yealink SIP-T2 Series Administrator's Manual

Values
Default Blank
Parameter dialplan.transfer.mode
It configures the transfer type the IP phone will perform when the entered transferee numbers match the
Dial Now rule of the dial plan.
Description
Note: It is only applicable to the old dial plan mechanism.
0-Semi-attended Transfer/Attended Transfer
Permitted
Values
1-Blind Transfer
Default 0
[1]
X is from 1 to 100.

Area Code Configuration

The following table lists the parameters you can use to configure area code.
Parameter dialplan.area_code.code
It configures the area code to be added before the entered numbers when dialing out.
Example:
dialplan.area_code.code = 0592
Description
Note: The length of the entered number must be between the minimum length configured by the para-
meter "dialplan.area_code.min_len" and the maximum length configured by the parameter "dialplan.area_
code.max_len". It works only if "dialplan.digitmap.enable" and "account.X.dialplan.digitmap.enable" are
set to 0 (Disabled).
Permitted
String within 16 characters
Values
Default Blank
Web UI Settings->Dial Plan->Area Code->Code
Parameter dialplan.area_code.min_len
It configures the minimum length of the entered number.
Description
Note: It works only if "dialplan.digitmap.enable" and "account.X.dialplan.digitmap.enable" are set to 0
(Disabled).
Permitted
Integer from 1 to 15
Values
Default 1
Web UI Settings->Dial Plan->Area Code->Min Length (1-15)
Parameter dialplan.area_code.max_len
It configures the maximum length of the entered number.
Description
Note: The value must be larger than the minimum length. It works only if "dialplan.digitmap.enable" and
"account.X.dialplan.digitmap.enable" are set to 0 (Disabled).
Permitted
Integer from 1 to 15
Values
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Call Features
263