Yealink SIP-T2 Series Administrator's Manual page 306

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Note: It is not applicable to T48G/T46G/T42G/T41P/T29G/CP920 IP phones. The value configured by this
parameter takes precedence over that configured by the parameter "features.feature_key_sync.enable".
0-Disabled
Permitted
Values
1-Enabled, the IP phone to send a SUBSCRIBE message with event "as-feature-event".
Default 0
Parameter features.dnd.feature_key_sync.enable
It enables or disables the DND feature synchronization.
Description
Note: It works only if "features.feature_key_sync.enable" is set to 1 (Enabled). It is not applicable to CP920
IP phones.
0-Disabled
Permitted
Values
1-Enabled, server-based DND is enabled. Server and local phone DND are synchronized.
Default 1
Parameter account.X.dnd.feature_key_sync.enable
It enables or disables the DND feature synchronization for account X.
Note: The value configured by this parameter takes precedence over that configured by the parameter
Description
"features.dnd.feature_key_sync.enable". It works only if "account.X.feature_key_sync.enable" is set to 1
(Enabled), and it is not applicable to T48G/T46G/T42G/T41P/T29G/CP920 IP phones.
0-Disabled
Permitted
Values
1-Enabled, server-based DND is enabled. Server and local phone DND are synchronized.
Default Blank
features.dnd.feature_key_sync.local_pro-
Parameter
cessing.enable
It enables or disables the local DND when DND feature synchronization is enabled.
Note: It works only if "features.feature_key_sync.enable" and "features.dnd.feature_key_sync.enable" are
Description
set to 1 (Enabled). The value configured by the parameter "account.X.features.dnd.feature_key_syn-
c.local_processing.enable" takes precedence over that configured by this parameter.
0-Disabled, DND is performed on the server side only.
Permitted
Values
1-Enabled, DND is performed on both server side and locally.
Default 0
account.X.features.dnd.feature_key_sync.local_pro-
Parameter
cessing.enable
It enables or disables the local DND when DND feature synchronization is enabled.
Description
Note: It works only if "features.feature_key_sync.enable" and "features.dnd.feature_key_sync.enable" are
set to 1 (Enabled).
0-Disabled, DND is performed on the server side only.
Permitted
Values
1-Enabled, DND is performed on both server side and locally.
Default Blank
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for T41P/T41S/T27G,
X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2.
300
[1]
[1]
<y0000000000xx>.cfg
<MAC>.cfg
<y0000000000xx>.cfg
<MAC>.cfg