Expansion Module Page Tips; Expansion Module Page Tips Indicator; Expansion Module Page Tips Configuration - Yealink SIP-T2 Series Administrator's Manual

Note: It is only applicable to T54S/T52S/T46S/T46G/T42S/T42G/T41S/T41P/T29G/T27G IP phones.
Permitted
0-Disabled
1-Enabled
Values
Default 0
Web UI Dsskey->Line Key->Enable Page Tips

Expansion Module Page Tips

On expansion module EXP50, the page tips feature supports page switch key LED to indicate that BLF monitored user
receives an incoming call on the non-current page.
Topics

Expansion Module Page Tips Indicator

Expansion Module Page Tips Configuration

Expansion Module Page Tips Indicator
The following table lists the status of page switch key LED displayed on the expansion module:
Models LED Status Icons
EXP50 Flashing red
Expansion Module Page Tips Configuration
The following table lists the parameters you can use to configure expansion module page tips.
Parameter expansion_module.page_tip.blf_call_in.enable
It enables or disables the page switch key LED on the expansion module to indicate when BLF monitored
user receives an incoming call on the non-current pages.
Description
Note: It is only applicable to EXP50 expansion modules connected to the T54S/T52S IP phones.
Permitted 0-Disabled
Values 1-Enabled
Default 1
Parameter expansion_module.page_tip.blf_call_in.led
It configures the page switch key LED status on the expansion module when BLF monitored user receives
an incoming call on the non-current pages.
This value uses the same macro action string syntax as an Enhanced DSS key.
If it is left blank, the default value takes effect.
Example:
Description
expansion_module.page_tip.blf_call_in.led = $LEDr300o300$
It means an infinite loop for page switch key LED status: glow red for 300ms and then be in the off state
for 300ms.
Note: It works only if "expansion_module.page_tip.blf_call_in.enable" is set to 1 (Enabled). It is only applic-
able to EXP50 expansion modules connected to the T54S/T52S IP phones.
/ The BLF monitored user receives an incoming call on the non-current pages.
Description
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Customization
119