State Indicator Of Remote Line - Yealink SIP-T2 Series Administrator's Manual

Parameter phone_setting.blf_list_sequence_type
It configures the order of BLF list DSS keys assigned automatically.
Description
Note: It works only if "phone_setting.auto_blf_list_enable" is set to 1 (Enabled). It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T29G/T27G IP phones.
0-linekey->exp1 key->expN key
1-exp1 key ->expN key ->linekey
Permitted 2-linekey page1->page1 from exp1 key to expN key ->page2 from exp1 key to expN key ->...->linekey
Values from page2 to page3
3-page1 from exp1 key to expN key ->page2 from exp1 key to expN key ->...->linekey
Note: N is the number of your connected expansion modules.
Default 0
Parameter features.blf_list_version
It enables or disables the IP phone to include the Version header in the BLF list NOTIFY message sent by
the server.
Description
Note: It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
0-Disabled
1-Enabled
Values
Default 0
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for T41P/T41S/T27G,
X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2.
[2]
If you change this parameter, the IP phone will reboot to make the change take effect.

State Indicator of Remote Line

The state indicator of the monitored line on BLF/BLF List key varies by phone models.
The following table shows the LED/icons indicator associated with the line you are monitoring.
LED Status
T48S/T48G T46S/T46G/T29G T54S/T52S
Solid green
(Flashing)
Fast-flashing red
(Flashing)
Solid red
Slow-flashing red
Off
[2]
Icons
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Description
The monitored line is idle.
The monitored line is ringing.
The monitored line is dialing.
The monitored line is busy or in a call.
The monitored line places a call on hold.
A call is parked to the monitored line.
The monitored line fails to register or does not exist.
Advanced Features
413