Example: Configuring A Directory List; Directory Search Settings; Directory Search Settings Configuration - Yealink SIP-T2 Series Administrator's Manual

Example: Configuring a Directory List

The following example shows the configuration for the directory list.
Customize the directory list file, and then place this file to the provisioning server "http://192.168.10.25".
Example
static.directory_setting.url = http://192.168.10.25 /favorite_setting.xml
After provisioning, you can press the Directory/Dir soft key to access the desired contact list quickly.

Directory Search Settings

You can configure how the phones search contacts and whether to highlight the matched keywords for contact search-
ing.
The following shows the search results on T46S/G IP phones:
Topic

Directory Search Settings Configuration

Directory Search Settings Configuration
The following table lists the parameters you can use to configure directory search settings.
Parameter directory.search_type
Description It configures the search type when searching the contact in Local Directory or Remote Phone Book.
0-Approximate string matching, the IP phone will search the contact numbers or names contain the
entered character(s).
Permitted
Values
1-Prefix matching, the IP phone will search the contact numbers or names start with the entered char-
acter(s).
Default 0
Parameter phone_setting.search.highlight_keywords.enable
It enables or disables the IP phone to highlight the matched characters in the search results.
Description
Note: It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
0-Disabled
1-Enabled
Values
Default 0
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Directory
255