Yealink SIP-T2 Series Administrator's Manual page 354

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Permitted
String
Values
Default Blank
Web UI Settings->Tones->Dial Recall
Parameter voice.tone.info
It customizes the info tone. The phone will play the info tone with the special information, for example,
the number you are calling is not in service.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
Description
"voice.tone.dial".
Note: It works only if "voice.tone.country" is set to Custom. If you want to disable this warning tone, set it
to 0.
Permitted
String
Values
Default Blank
Web UI Settings->Tones->Info
Parameter voice.tone.stutter
It customizes the tone when the IP phone receives a voice mail.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
Description "voice.tone.dial".
Note: It works only if "voice.tone.country" is set to Custom. If you want to disable this warning tone, set it
to 0.
Permitted
String
Values
Default Blank
Web UI Settings->Tones->Stutter
Parameter voice.tone.message
It customizes the tone when the IP phone receives a text message.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
Description "voice.tone.dial".
Note: It works only if "voice.tone.country" is set to Custom. If you want to disable this warning tone, set it
to 0. It is not applicable to CP920 IP phones.
Permitted
String
Values
Default Blank
Web UI Settings->Tones->Message
Parameter voice.tone.autoanswer
It customizes the warning tone for the auto answer.
Description
The value format is Freq/Duration. For more information on the value format, refer to the parameter
"voice.tone.dial".
348
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg